Bespoke staircases in Morley
Bespoke timber staircases set out from a site survey, manufactured in our workshop and installed by our own fitters. Covering Morley and the wider West Yorkshire area.
- Made to size from a measured survey, never cut down from stock
- FSC-certified timber with chain-of-custody paperwork
- Fixed written quotation with the lead time stated
- 10-year workmanship guarantee in writing
Free measured survey · No obligation · Reply within one working day
Quote for Morley
Free measured survey in Morley.
Bespoke staircases in Morley
Cantilever Staircases in Morley is rarely a catalogue job. Most of what we survey locally is millstone grit terraces, weavers' cottages and Victorian civic frontages, which is not built to any modern module. The exposure here is Pennine exposure with hard frost and horizontal rain, which is exactly the condition that causes frost damage at end grain and blown joints on exposed hillside stock. Everything we do here comes back to the hidden steelwork that makes a floating tread genuinely safe.
Nothing is ordered until someone has stood in front of the opening with a tape. Ask us for a figure and you will get one, with the lead time stated alongside it.
Worth knowing locally: gritstone reveals hold water against frames, so drainage detail is critical.
What we cover locally
- Bespoke Staircases in Morley
- Cut String Staircases in Morley
- Open Riser Staircases in Morley
- Cantilever Staircases in Morley
Survey visits in Morley are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Morley
Every item below is manufactured to your dimensions.
Bespoke Staircases
Designed and set out from your actual floor-to-floor height.
Learn more →Cut String Staircases
Open-sided stairs with the treads exposed at the string.
Learn more →Open Riser Staircases
Contemporary open-tread stairs meeting Part K.
Learn more →Cantilever Staircases
Floating treads with concealed structural support.
Learn more →Staircase Renovation
Re-treading, re-balustrading and squeak elimination.
Learn more →Handrails and Balustrades
Continuous handrails, volutes, spindles and newel posts.
Learn more →Loft Conversion Stairs
Space-saving flights for tight loft openings.
Learn more →Staircase Parts
Newels, spindles, strings and treads supplied loose.
Learn more →Rise, going and headroom in Morley
Three numbers decide whether a staircase is comfortable or awkward, and they are the first things we measure.
Rise
Maximum 220mm per step for a private stair under Part K. Consistent to within 5mm across the whole flight, because the foot notices what the eye does not.
Going
Minimum 220mm. Rise and going together must satisfy the pitch rule, which is why a flight cannot simply be shortened to fit a smaller opening.
Headroom
2m measured vertically from the pitch line. This is the constraint that most often forces a winder instead of a straight flight.
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“The headroom was tight and they redesigned the winder rather than telling us it could not be done.”
Verified client, West Yorkshire“Dry-assembled in the workshop first, so installation day was genuinely uneventful.”
Verified client, West Yorkshire“No squeaks at all a year on, which was the whole reason we replaced the old one.”
Verified client, West YorkshireMorley questions
Can you work on a listed building?
Yes, and a significant share of our work is listed or conservation area. We can supply drawings and section details to support a listed building consent or planning application, though the consent itself remains the owner's responsibility.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Do you fit, or supply only?
Both. Supply-only is common for trade and contractor clients. For private clients we usually recommend supply and fit, because responsibility for the fit and the finish then sits in one place.
Will the finish need maintaining?
A factory-applied microporous finish typically needs inspection every three to five years, sooner on exposed coastal elevations. Maintaining it is far cheaper than letting a coating fail and the timber take up water.
Do you work in hardwood or softwood?
Both. Engineered hardwood is the default where movement or exposure is a concern, and slow-grown softwood is often the better value choice for painted work in sheltered positions. We will tell you which we would specify and why.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248