Bespoke staircases in Mold
Bespoke timber staircases set out from a site survey, manufactured in our workshop and installed by our own fitters. Covering Mold and the wider North Wales area.
- Made to size from a measured survey, never cut down from stock
- FSC-certified timber with chain-of-custody paperwork
- Fixed written quotation with the lead time stated
- 10-year workmanship guarantee in writing
Free measured survey · No obligation · Reply within one working day
Quote for Mold
Free measured survey in Mold.
Bespoke staircases in Mold
Loft Conversion Stairs in Mold is rarely a catalogue job. Given the slate-quarry terraces, Victorian resort stock and stone farmhouses that dominates locally, standard sizes are the exception not the rule. Then there is severe Irish Sea exposure with very high rainfall, which reliably produces salt and rain combining to strip finishes and open glazing joints given enough seasons. What you are paying for is fitting a compliant flight into an opening that barely allows one.
Manufacture only starts once the survey figures are agreed with you in writing. Ask us for a figure and you will get one, with the lead time stated alongside it.
One thing that catches people out here: Llandudno's Victorian frontages are protected as a coherent conservation set.
What we cover locally
- Bespoke Staircases in Mold
- Cut String Staircases in Mold
- Open Riser Staircases in Mold
- Cantilever Staircases in Mold
Survey visits in Mold are usually booked within a week. There is no charge for the survey and no obligation to proceed.
Made to size for Mold
Every item below is manufactured to your dimensions.
Bespoke Staircases
Designed and set out from your actual floor-to-floor height.
Learn more →Cut String Staircases
Open-sided stairs with the treads exposed at the string.
Learn more →Open Riser Staircases
Contemporary open-tread stairs meeting Part K.
Learn more →Cantilever Staircases
Floating treads with concealed structural support.
Learn more →Staircase Renovation
Re-treading, re-balustrading and squeak elimination.
Learn more →Handrails and Balustrades
Continuous handrails, volutes, spindles and newel posts.
Learn more →Loft Conversion Stairs
Space-saving flights for tight loft openings.
Learn more →Staircase Parts
Newels, spindles, strings and treads supplied loose.
Learn more →Rise, going and headroom in Mold
Three numbers decide whether a staircase is comfortable or awkward, and they are the first things we measure.
Rise
Maximum 220mm per step for a private stair under Part K. Consistent to within 5mm across the whole flight, because the foot notices what the eye does not.
Going
Minimum 220mm. Rise and going together must satisfy the pitch rule, which is why a flight cannot simply be shortened to fit a smaller opening.
Headroom
2m measured vertically from the pitch line. This is the constraint that most often forces a winder instead of a straight flight.
What clients tell us
Feedback collected directly from completed projects. Full written references are available on request before you commit.
“The headroom was tight and they redesigned the winder rather than telling us it could not be done.”
Verified client, North Wales“Dry-assembled in the workshop first, so installation day was genuinely uneventful.”
Verified client, North Wales“No squeaks at all a year on, which was the whole reason we replaced the old one.”
Verified client, North WalesMold questions
What guarantee do you provide?
Ten years on workmanship, covering manufacture and the factory-applied finish. Where we install, the installation is covered too. It is issued in writing with the handover paperwork.
Do you deliver nationwide?
Yes, we deliver across England, Wales and Scotland. Delivery is priced into the quotation so there is no separate charge added later.
Can you match an existing profile?
Yes. If you can supply a section, a photograph with a rule in shot, or an old unit, we can replicate the profile. For conservation work this is usually the condition the planning officer will apply.
Can you work on a listed building?
Yes, and a significant share of our work is listed or conservation area. We can supply drawings and section details to support a listed building consent or planning application, though the consent itself remains the owner's responsibility.
What if the opening is out of square?
Most older openings are. The survey records the actual dimensions at several points and the unit is manufactured to suit, which is the main reason we survey rather than work from the sizes given over the phone.
Talk to us about your project
Free, no obligation, and a fixed figure in writing. We will tell you honestly if what you are asking for is not the right answer.
Request a quote Call 0800 088 6248